How many people understand completely the functions of Whirlpool duet washer parts? Not too many, I suppose. Most of us do not take the time to know more about out washers. For as long as it is working, there is simply no need for us to get down to the washing machine details.

A comprehensive knowledge on various Whirlpool duet washing machine parts can actually make your clothes washing work easier. Suppose you encounter a problem or two in the future with this machine, you will know which parts to look for, replace and fix. As you probably know, hiring someone else to do the job for you is costly.

Whirlpool Duet Washer Parts And Their Uses

This is the best time to get the low-down on the various parts of your laundry appliance. Start with the following:

• Washer Drain Pump Assembly – This actually works in different models of Whirlpool, including the duet washer. It can also be used for Kenmore washing machines. It is a combination of white and grey colored plastic pieces. The white plastic piece is perpendicularly connected to the grey one.
• Front Tub Seal – This is the main seal found between the front bulkhead of the washer and the outer tub of front load washing machines. Whirlpool and other Whirlpool-made appliances can use this part.
• Shock Absorber – This absorbs the motion of the machine and prevents the machine from getting damaged because of excess vibration or excessive motion. You need about 4 of this in one Whirlpool machine.
• Inlet Valve – the inlet valve is where the water hose is attached to. There are usually two valves: one for the hot water source and one for the cold water source.
• Drum Drive Pulley – This is necessary for the rotation of the washer drum.
• Door Lock – This ensures that the front door of the machine stays closed. It remains that way for child safety purposes.
• Belt – This is the part that allows the washer drum to tumble and spin. Without the belt or with a deteriorating drive belt, the machine will have trouble performing a good spin cycle.
• Hose (tub to pump) – This is needed to successfully drain the water in the machine. It is connected to the pump.
• Water level pressure switch – This Whirlpool machine is capable of identifying the right amount of water level needed to clean your clothes. It uses this switch to fill the machine with just the right amount of water.
• Drain hose – This is needed to completely wash off the water out of the machine.
• Filter cap – This is for the drain pump. It filters the water.

How To Maintain Whirlpool Duet Washer Parts

The various washer parts can easily break down especially if they are not subjected to rigorous maintenance. You need to constantly maintain your washer even during the washing cycle to ensure that it will work longer.

Here are some tips on how you can Whirlpool duet washer parts:

1. Avoid running hot water cycle frequently. If your clothes are clean, use cold or warm water. If there are stains, pre-treat the stains first to get rid of the dirt. Frequently running hot water cycle will only damage the motor of the machine, not to mention speed up the deterioration of your clothes.

2. When washing small articles of clothing just like socks or handkerchief, it will be better if you just place them in a mesh bag. Sometimes, they can get stuck in the pump of the machine. This will cause clogging problems.

3. Clean the water filter at least once a month. Tap water contains debris and hard minerals that might accumulate on the other side of the filter. This will block the good flow of water causing low water pressure. The machine will not function well if it has not been filled up with water at the right level.

4. Do not attach the water valve and the water hose too tightly. Use a clamp to attach them first but use your hands to measure the tightness. If it is too tight, you can damage the rubber seal which will cause leaking. If it is too loose, it will also cause leaking. Test the washer first after adjusting the tightness of the valve and the water hose. Inspect the machine for signs of leaks.

5. Try to use the right spin speed. Fast spin speed will only wear out the machine faster. The motor will deteriorate quickly. When spin drying delicate garments, use just the moderate spin speed to avoid Whirlpool duet washer parts problems.

Back from Whirlpool Duet Washer Parts to Whirlpool Washers

Back from Whirlpool Washing Machines to Washing Machine Reviews